PERATION
The switch on the LP12 provides a
trigger to the electronics to start or stop the
motor. It does not break any mains connection.
Power remains on the circuit board all the time, though
static power consumption is very low.
After connection the circuitry should be given a few
seconds to settle before switching the motor on.
To prevent electric shock, never remove the bottom
cover from the turntable whilst it is connected to the
mains.
The LP12 was designed to give optimum performance at
33 rpm. However a 45 rpm adaptor is available for
occasional use.
O
Summary of Contents for Sondek LP12
