4
WARNING The pre-amplifier and the power amplifier must be switched off before connecting or
disconnecting any of the plugs on the rear panel.
For all the following input connections ensure that the left channel plug from the source is connected to
the left channel socket on the pre-amplifier, and likewise for the right channel connection.
All the inputs on the Pretek are RCA phono. Good quality leads should be used when connecting signal
sources to the preamplifier. Your dealers will
be able to supply all the necessary interconnect leads.
There is a binding post for the phono earth connection located above the phono inputs. A switch to the
left of the phono sockets selects between moving-coil and moving-magnet cartridges.
If you are using a moving-coil cartridge the switch should be out and your turntable should be connected
to the sockets marked MC. For moving-magnet cartridges, the switch should be pushed in and the
sockets marked MM should be used.
NOTE The amplifier should be switched off before pressing the phono input switch.
The sockets marked line output provide the signal to be routed to the power amplifier.
INPUT CONNECTIONS
Summary of Contents for PRETEK
Page 1: ......