5
TANDS KAN/SARA. When assembling
stands, fit all the bolts loosely before final
tightening.
Ensure that the stand is level and that the
speaker rests firmly on the top.
We include small top spikes with the Kan and
Sara stands. These will bed slightly into the
base of the speaker. This ensures a firm
coupling between the speaker and the stands.
DMS/PMS. The current stand has a welded box
section. These stands feature spikes which bolt
onto the top and bottom of the stand. The top
spikes should locate into the pads on the base of
the speaker. To
fit these stands,
the speaker
should be
inverted with
care (use the
top piece of
original packing
to protect the
speaker) and
the top spikes
adjusted to give no play.
The stand should then be placed on the floor and the speaker placed on top.
The bottom spikes should now be adjusted to give the minimum amount of
movement. Once the spikes have been adjusted, then the locking nuts should
be fully tightened.
GENERAL. On wooden floors it can be useful to mount the bottom spikes onto
the heads of crosshead woodscrews. These should be fully screwed into the
floor boards, using the adjustment provided on the spike to take up any play
and ensure maximum rigidity.
S
