Outputs
See the reference card supplied for connection instructions for your model of KLIMAX AKTIV.
Important notes
Wrong connection could result in damage to loudspeaker drive units.
The KLIMAX AKTIV crossover should only be used with a loudspeaker that has been manufactured or
upgraded to AKTIV specification. Using an AKTIV crossover with a passive loudspeaker will result in poor
performance and could also damage the amplifiers and loudspeakers.
Tip
When first playing your system after connection of the KLIMAX AKTIV crossover, adjust the volume
down to 0 before playing (do not use ‘Mute’ as, with some controllers, raising the volume may suddenly
restore it to its original setting). Play a track, then turn the volume up a few steps until the sound
becomes only just audible and carefully check that the correct sound is coming from each drive unit
(treble from the treble units, bass from the bass etc). By doing this, if any connections turn out to have
been made incorrectly, damage to drive units is unlikely to occur.
10
Installation
(continued)
Summary of Contents for KLIMAX AKTIV
Page 1: ...E n g l i s h KLIMAX AKTIV CROSSOVER OWNER S MANUAL ...
Page 8: ......
