Linn KEOSA, Owner'S Manual, Page: 9 / 16

7
NSTALLATION GUIDE Lift the cabinets from the carton by their sides
to avoid damaging drive units. If you can, keep the packing for possible
future transportation.
SPIKES
To fit the spikes to your KEOSAs, lay the loudspeakers on their backs or
tops on a soft surface. Screw the locknuts halfway onto the spikes,
then screw the floor spikes through the washers into the stand base.
Tighten finger tight for the moment. Lift your KEOSAs into their final
position in the room. Gently rock the speakers back and forth while
applying downward pressure by leaning on top of the cabinet. This will
ensure the spikes penetrate the carpet and are in contact with the floor.
Now adjust the spikes and locknuts until the speakers are vertical and all four
spikes are firmly in contact with the floor. Try and gently rock the speaker to
see if it is only sitting on three spikes or four. When the speaker is rigidly
sitting on the floor, tighten the lock nuts whilst ensuring the spikes
do not turn.
I