4
By using a separate cable for the bass and treble section some interaction between the bass and treble
section is removed. The extra cost of an additional pair of loudspeaker cables is more than justified by
the improvement in sound quality.
Your local Linn Dealer can supply Linn pre-made 5m or 10m bi-wired K20 speaker leads, or make up
other lengths as necessary and set up your loudspeakers.
To convert the KAN II to single wire mode, use the key provided to unscrew the negative (black) socket
caps and fit the link. Replace and tighten the caps and then repeat for the positive (red) sockets and
firmly re-tighten.
For ultimate performance you can go one stop beyond bi-wiring and use two amplifiers, one channel for
the bass and one channel for the treble. Your dealer will be pleased to effect this mode of operation for
you.
The KAN II loudspeaker requires no internal maintenance and on no account should you try to remove
either the grille or the drive units, which are carefully tightened and sealed at the factory.
For servicing, always return the speakers as a pair to your supplier, using the original packing in order to
reduce the risk of damage in transit.
If you have lost the packaging, your supplier can provide a replacement set.
BI-WIRING
BI-AMPING
MAINTENANCE/SERVICE
