INSTALLATION
Unpack the unit and retain the packing for future transportation.
KAIRN Pre-amplifier Unit
Owner Manual and Registration Card
Remote Control Handset
2 x Single Phono-Phono Lead
Mains Lead
2 x Single Phono-XLR lead
Spare Fuse
WARNING Use the earthed moulded mains lead supplied. Never use an unearthed
plug or adaptor.
WARNING
THIS APPLIANCE MUST BE EARTHED
IMPORTANT
The wires in this mains lead are coloured in accordance with the following code:
Green-and-Yellow: Earth
Blue:
Neutral
Brown:
Live
As the colours of the wires in the mains lead of this appliance may not correspond
with the coloured markings identifying the terminals in your plug, proceed as
follows:
The wire which is coloured green-and-yellow must be connected to the terminal in
the plug, which is marked with the letter E or by the earth symbol or coloured green
or green-and-yellow.
The wire which is coloured blue must be connected to the terminal which is marked
with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal which is
marked with the letter L or coloured red.
All the input sockets on the Linn KAIRN are RCA phono. High quality interconnect
leads are available for connecting other sources to the pre-amplifier.
WARNING The pre-amplifier and the power amplifier must be switched off before
connecting or disconnecting any of the plugs on the rear panel.
For all the following input connections ensure that the left channel plug from the
source is connected to the left channel socket on the pre-amplifier, and likewise for
the right channel connection.
CONTENTS
INPUT CONNECTIONS
4
KAIRN ENG PLACED 11/27/02 9:26 AM Page 9
