“Aqua-Jet” (submersible motor)
(Translation of the operating instructions)
You receive a water-circulation-pump completely ready installed for operation. Please pay
attention to the following instructions and we guarantee a secure application in your
waters.
Electric connection
Condition for a regular operation of water-circulation-pump is an electrical connection
acording to VDE. The ELCB is absolutely stipulated. Repair works at electrical connection
or at motor the manufacturer or an electrican expert carries out.
Starting operations
1. We supply the water-circulation-pump with submersible motor completely ready for
application..
2. For installation you need a rope. Please fasten this rope at motor fastening. With this
rope you can place the water-circulation-pump into the desired position. Opposite the rope
you can use the cable to fasten
Aqua-Jet
. A secure fastening guarantees a perfect
application of water ventilation.
3. Please absolutely prevent connection cable against eventual damages, otherwise water
can run through the cable into the submersible motor.
4.The fountain cowl is easy to adjust. Please unfix the both lateral grips. Than you can
adjust
the cowl in desired position. Afterwards you can screw the both grips in tight.
Maintenance
The water circulation-pump
Aqua-Jet
works almost free of maintenance. You only have to
clean the input screen and appliance now and then. Beside please check at least once a
year the perfect running of axial-paddle-wheel.
For this device we give one year’s guarantee, correct application provided.