Installation Guide Linear Motors
ENG
NTI AG / LinMot
P10-54 / P10-54-D24/25/25S
Page 7 / 32
3 Installation instructions
3.1 Operating conditions
Maximum ambient temperature limits:
•
10 °C…80 °C
Internal temperature sensor error occurs at:
•
90 °C
3.2 Instructions for installing the linear motor
Please attend to the safety instructions in chapter 2 during the assembling!
For maintenance purposes, please observe the installation instructions in chapter 6.
1. Clean the slider with a paper towel.
2. Lubrication of the slider
Sliders with a length ≤ 500 mm are inserted
without lubrication.
Sliders with a length > 500 mm are
lubricated with a grease amount of 4 g
(0.14 oz) per meter, which is is about ½ of
a hazel-nut.
3. Insert the slider in the defined direction
(see Assembly step 4.).
Attention!
The slider is magnetically
attracted.
