Installation Guide Linear Motors
ENG
NTI AG / LinMot
P02-23S / P01-37S Short type
Page 23 / 30
* LinMot Spray LU06 corresponds to KLÜBERFOOD NH1 4-002 which was developed for the food
processing industry.
**
LinMot LU02 Lubricant corresponds to KLÜBERSYNTH UH1 14-31 which was developed for the food
processing industry.
7 Storage, transport, installation altitude
•
Sliders are to be stored and transported only in the plastic containers (with cardboard inlay) provided for
this purpose, or already installed and secured in LinMot P stators.
•
Remove the slider from this plastic containers only for assembling.
•
The storage area must be dry, dust-free, frost-free and vibration-free.
•
The relative air humidity should be less than 95 %.
•
Prescribed storage temperature: -
15 °C…70 °C
•
The motor must be protected against extreme weather conditions.
•
The air in the storage area must not contain any harmful gases.
•
The max. installation altitude is 4'000 m (for higher values contact LinMot) above sea level.
•
From 1'000 m, derating of 1 °C per 100 m is to be considered for air cooling.
