Installation Guide Linear Motors
ENG
Seite 8 / 30
P01-23-HP-SSCP
NTI AG / LinMot
Insert the slider in the defined direction (see
next assembly step).
Large magnetic attraction forces
(Observe warning notice from page 5)!
If necessary, cover obvious iron constructions
with non-magnetic material (e.g. wood).
Observe excentric stator bore during
assembly.
See dimensions in chapter 9.
Checking the installed direction of slider
After the installation, the front end of the slider
is located at the opposite side of the stator from
the cable connector or cable exit.
3.3 Mounting the Stator
The stator can be mounted vertically and horizontally using the threaded holes provided. Both mounting
options are shown below.
3.3.1 Vertical Mounting of the Stator
Mounting using the threaded holes on the front
side. See thread details in chapter 9 "Dimensions".
Slider front end
with ring / notch
