Linmore LED Labs
| 2360 S Orange Ave, Fresno CA 93725 | 559-485-6010 | www.linmoreled.com | [email protected]
Wall Mounted Area Light ( WAL) Installation Instructions | Page 2 of 2
1. Remove cover and lens.
2. Remove (2) two driver
mounting screws and swing
driver assembly out of your way.
3. Mount fixture body to standard
J-Box or directly to wall, using
universal mounting options.
4. Feed existing power through top
or rear knockouts, connect power,
connect low-voltage LED wires and
secure with supplied wire nuts and
reassemble entire fixture.
RED
BLK
GN
D
