49
9.21
Intercom settings >> Media
Picture 41 - Media Settings
Table 24 - Media Setting
Parameters
Description
Codecs Settings
Select the enabled and disabled voice codecs
codec:
G.711A/U,G.722,G.729,ILBC,opus
Media Setting
Default Ring Type
Set the default ring type. If the caller ID of an incoming call
was not configured with specific ring type, the default ring
will be used.
Speakerphone Volume
Set the speakerphone volume, the value must be 1~9
Speakerphone Ring Volume Set the ring volume in the speakerphone, the value must
be 1~9
Speakerphone Ring Volume Set the ring volume in the speakerphone, the value must
be 1~9
DTMF Payload Type
Enter the DTMF payload type, the value must be 96~127.
Opus playload type
Enter the opus payload type, the value must be 96~127.
OPUS Sample Rate
Set the opus sample rate
，
including OPUS-NB
（
8KHz),
OPUS-WB
（
16KHz
）
ILBC Payload Type
Set the ILBC Payload Type
ILBC Payload Length
Set the ILBC Payload Length
Enable VAD
Enable Voice Activity Detection. When enabled, the
device will suppress the audio transmission with artificial
comfort noise signal to save the bandwidth.
