background image

 

4

Important

 

 
 

Before using the Product, please carefully read the precautions described below to ensure 
proper operation. 

 

z

 

Do not open the case or modify contents of the product. Seek the help of an authorized 

professional if some problem occurs with the product. 

 

z

 

This product and other wireless devices may cause interference on each other and as 

result performance of the product may be affected. 

 

z

 

Moving the PC during data transfer may damage the data being transferred. 

 

z

 

Make sure to stop all wireless data transfer prior to removing the product from the PC 

in order to avoid damage to transferred data, PC or the product. 

 

z

 

Please make sure the product will not cause hazards to other local equipment prior to 

operating in hospitals, airplanes, etc. or other locations susceptible to interference. 

 

z

 

Do not expose the product to dangerous environment such as fire, chemicals or 

explosives, which may damage the product. 

 

z

 

Unplug power and telephone cables from PCs and The product during severe 

thunderstorms or lightning. 

 

z

 

Avoid

 dropping the product or subjecting it to excessive impacts

 

 

z

 

Avoid contact of the product with water since this may damage it.

 

 

z

 

Because 

exposing  of  the  product  to  high  humidity  and/or  extremely  variable 

temperatures  may  deteriorate  its  performance,  avoid  as  much  as  possible 
operating it under such environments

 

 

z

 

To prevent the risk of losing important data saved in the PC during installation of the 

product, it is advisable to backup all important files before installation. 

 

z

 

This device is limited in CH1 ~ CH11 by specified Firmware controlled in 

U.S.A. 

 
 

Summary of Contents for WUSB54AGP




























Reviews: