background image

43

Appendix E

Software End User License Agreement

Wireless-N Home Router

of  the  Software  or  its  related  Documentation,  or 

electronically  transfer  the  Software  or  Documentation 

from one computer to another or over a network; (ii) alter, 

merge, modify, adapt, decrypt or translate the Software or 

related  Documentation,  or  decompile,  reverse  engineer, 

disassemble,  or  otherwise  reduce  the  Software  to  a 

human-perceivable form (except to the extent expressly 

permitted  by  law  notwithstanding  this  provision); 

(iii)  share,  sell,  rent,  lease,  or  sublicense  the  Software  or 

related Documentation; (iv) modify the Software or create 

derivative  works  based  upon  the  Software;  (v)  if  you 

make a backup copy of the Software and Documentation, 

you must reproduce all copyright notices and any other 

proprietary  legends  found  on  the  original  Software  and 

Documentation; (vi) use the Software for management of 

a business network with more than 8 computers; (vii) use 

the  Software  under  any  circumstances  for  competitive 

evaluation,  including  developing  competing  software; 

(ix) to the extent permitted under applicable law, assign, 

sublicense  or  otherwise  transfer  the  Software  unless 

the  prospective  assignee,  sublicensee  or  transferee 

expressly agrees to all the terms and conditions under this 

Agreement.
The  Software  and  Documentation  contain  trade  secrets 

and/or copyrighted materials of Cisco or its suppliers. You 

will not disclose or make available such trade secrets or 

copyrighted material in any form to any third party.
In the event that you fail to comply with this Agreement, 

the  license  granted  to  you  will  automatically  terminate, 

at  which  time  you  must  immediately  (i)  stop  using  the 

Cisco  Product  in  which  the  Software  is  embedded,  or 

(ii)  uninstall  the  Software  and  destroy  all  copies  of  the 

Software  and  Documentation  where  the  Software  is 

purchased separately. All other rights of both parties and 

all  other  provisions  of  this  Agreement  will  survive  this 

termination.

Ownership.

  The  Software  and  Documentation  are 

licensed  and  not  sold  to  you  by  Cisco  and  the  relevant 

third parties set forth in Schedule 3. Cisco and its licensors 

retain  all  right,  title  and  interest,  including  all  copyright 

and  intellectual  property  rights,  in  and  to,  the  Software 

and Documentation and all copies and portions thereof. 

All rights not specifically granted to you in this Agreement 

are  reserved  by  Cisco  and  its  licensors. Your  use  of  any 

software product from an entity other than Cisco that may 

have  been  recommended  by  Cisco  is  governed  by  such 

software product’s end user license agreement.

Links  and  Advertising.

  Cisco  may  provide  from  within 

the  Software  links  to  websites  or  third  party  software 

products  that  are  beyond  our  control.  Cisco  makes  no 

representations as to the quality, suitability, functionality, 

or  legality  of  any  sites  or  products  to  which  links  may 

be  provided,  and  you  hereby  waive  any  claim  you 

might  have  against  Cisco  with  respect  to  such  sites  or 

third  party  software  products.  Your  correspondence  or 

business  dealings  with,  or  participation  in  promotions 

of  advertisers  found  through  the  Software  and  any 

other  terms,  conditions,  warranties,  or  representations 

associated with such dealings, are solely between you and 

such advertiser. You agree that Cisco is not responsible or 

liable for any loss or damage of any sort incurred as the 

result of any such dealings or as the result of the presence 

of such advertisers in the Cisco Software.

Collection  and  Processing  of  Information.

  You  agree 

that  Cisco  and/or  its  affiliates  may,  from  time  to  time, 

collect and process information about your Cisco product 

and/or  the  Software  and/or  your  use  of  either  in  order 

(i)  to  enable  Cisco  to  offer  you  Upgrades;  (ii)  to  provide 

support  and  assistance  with  your  product  and/or  the 

Software;  (iii)  to  ensure  that  your  Cisco  product  and/or 

the Software is being used in accordance with the terms 

of  this  Agreement;  (iv)  to  provide  improvements  to  the 

way Cisco delivers technology to you and to other Cisco 

customers;  (v)  to  provide  reports  regarding  the  status 

and health of the network, including network traffic and 

application  usage;  (vi)  to  enable  Cisco  to  comply  with 

the terms of any agreements it has with any third parties 

regarding  your  Cisco  product  and/or  Software;  and/or 

(vii)  to  enable  Cisco  to  comply  with  all  applicable  laws 

and/or regulations, or the requirements of any regulatory 

authority or government agency. Cisco and/ or its affiliates 

may collect and process this information provided that it 

does not identify you personally. 
The  reports  feature  of  certain  Software  allows  you  to 

monitor the activity of computers running the Software in 

your home or small office. You must activate this feature in 

order to receive reports. If you activate the reports feature, 

you  agree  to  the  following:  (a)  the  Software  tracks  and 

monitors the following components and activities in your 

home or office: network traffic (e.g. megabytes per hour), 

application usage (the foreground window is tracked and 

the  time  each  application  is  in  the  foreground  during 

active usage of the computer) and internet history. (b) For 

all  computers  on  which  reports  feature  is  enabled,  the 

above information is transmitted to servers at Cisco and/

or a third party at periodic intervals while the computer 

is  online. This  information  is  associated  and  stored  with 

the  email  address  supplied  by  you  when  you  activated 

the reports feature. This information is summarized into 

a  formal  report  and  is  emailed  to  the  identified  email 

address.  (c)  Any  computer  on  the  network  running  the 

Software  can  enable  any  other  computer  (on  the  same 

primary network) to generate reports. When a computer 

is  enabled,  that  computer  shows  a  notification  that  it  is 

being  monitored.  As  long  as  that  computer  is  enabled, 

each time the Software is started the user of that particular 

computer will see a notification that it is being monitored 

by the reports feature. Any computer on the network with 

the  Software  installed  can  enable  or  disable  any  other 

computer from the reports feature.

Summary of Contents for WRT120N - Wireless-N Home Router Wireless




























































Reviews: