Linksys WRK54G Page 67 User Manual Download

Page: 67 / 80

Appendix E: Finding the MAC Address and IP Address for Your Ethernet Adapter
For the Router’s Web-based Utility

Wireless-G Broadband Router

3. Write down the Physical Address as shown on your computer screen; it is the MAC address for your Ethernet

adapter. This appears as a series of numbers and letters.

The MAC address/Physical Address is what you will use for MAC address cloning or MAC filtering.

The example to the right shows the Ethernet adapter’s IP address as 192.168.1.100. Your computer may show
something different.

For the Router’s Web-based Utility

For MAC filtering, enter the 12-digit MAC address in this format, XXXXXXXXXXXX, WITHOUT the hyphens.

For MAC address cloning, enter the 12-digit MAC address in the

MAC Address

fields provided, two digits per field.

Figure E-4: MAC Address Filter List

Note:

The MAC address is also called the Physical Address.

Figure E-5: MAC Address Clone

Summary of Contents for WRK54G

















































































Search results

Summary of Contents for WRK54G

Reviews:

Related manuals for WRK54G

Brands by name

Popular brands

Linksys WRK54G, User Manual

Search results

Summary of Contents for WRK54G

Reviews:

Related manuals for WRK54G

Brands by name

Popular brands