16
15
Obtaining Device Information:
The Device Information Icon
To access information about the Wireless PrintServer,
either click on it in the Device List window (on the right
side of the Bi-Admin window) or highlight the Wireless
PrintServer and click on the Device Information icon, shown above. You can
also highlight the Wireless PrintServer and then click on Status to select
Device Information. The Bi-Admin program displays the Wireless PrintServer’s
information in a read-only window, and gives you the following information:
Hardware ID: 0620103428
Firmware Version: 6010
Protocol ID: 003F
Default Name: SCA71107
Server Name: SCA71107
NetWare Info:
Master File Server:
NDS Tree Name:
NDS Tree Context:
Print Server Mode Status:
Remote Printer Mode Status: N/A
AppleTalk Info:
Printer Type:
SCA71107:LaserWriter
TCP/IP Info:
IP Address: 192.168.1.78
Gateway Address: 192.168.1.254
Subnet Mask: 255.255.255.0
Email Server IP Address: 0.0.0.0
Printing Account Name: N/A
Redirect Account Name: N/A
SMB Info:
Domain Name: WORKGROUP
You can save this information to a text file by clicking Save to Text in the
Device Information window and giving Bi-Admin the location to which the
file should be saved.
Using Bi-Admin
Wireless PrintServer
2. When the Bi-Admin program appears, it will automatically scan the net-
work for available Wireless PrintServer hardware. Any hardware found on
the network will appear in the Default Name, Device Name, and Printer
Port categories on the right hand side of window. Default Name is the SC
number located on the back or bottom of the Wireless PrintServer unit, and
cannot be changed.
3. When any change or operation is executed, you will be prompted for a pass-
word. Enter the password, making sure to use the same case (i.e. upper or
lower) that you used when creating the password.
“Device name” is a nickname that you can give the Wireless PrintServer to
make it more user-friendly for users on the network. It can be changed with Bi-
Admin by clicking on Configuration, then System.
“Printer Port” displays the model of the Wireless Printserver that you are using.
Bi-Admin Help Files
The Help files for the Bi-Admin program can be accessed by clicking on Help
in the Menu bar. These help files offer extensive advice and details about all of
the Wireless PrintServer’s functions and capabilities.
N
No
otte
e:: Sometimes the Wireless PrintServer's E
Errrro
orr or A
AC
CT
T LED may light
up or flicker as it accepts your configuration changes, which is normal.
Instant Wireless™ Series
