Linksys WPC55AG User Manual Download Page 22

Page: 22 / 58

Chapter 5: Connecting the Dual-Band Wireless A+G Notebook Adapter
Inserting the Adapter into Your Notebook

Dual-Band Wireless A+G Notebook Adapter

Chapter 5: Connecting the Dual-Band Wireless A+G Notebook
Adapter

Inserting the Adapter into Your Notebook

1. Power down your notebook computer.

2. Locate an available CardBus slot on your notebook computer.

3. With the connector pin end facing the CardBus slot and the label facing up, slide the Adapter into the CardBus

slot until it locks into place.

4. Power on your notebook computer. The Power LED should light up when the Adapter is installed correctly.

5. Windows will begin copying the driver files to your computer. If Windows asks you for the original Windows

CD-ROM, insert the CD-ROM, and direct Windows to its correct location (e.g., D:/).

Windows 2000 users: When Windows 2000 begins installing the Adapter’s driver, a

Digital Signature Not

Found

screen may appear, indicating that a digital signature was not found. This driver has been tested and

found to work properly with Windows 2000. Click the

Yes

button to continue the installation.

Congratulations! The installation of the Dual-Band Wireless A+G Notebook Adapter is complete.

If you want to check the link information, search for available wireless networks, or make additional

configuration changes, go to “Chapter 6: Using the Wireless Network Monitor.”

Figure 5-1: Insert the Adapter into Your Notebook

NOTE:

You must run the Setup Wizard before connecting the Adapter.

Figure 5-2: Digital Signature Not Found Screen

Summary of Contents for WPC55AG



























































Search results

Summary of Contents for WPC55AG

Reviews:

Related manuals for WPC55AG

Brands by name

Popular brands

Linksys WPC55AG, User Manual

Search results

Summary of Contents for WPC55AG

Reviews:

Related manuals for WPC55AG

Brands by name

Popular brands