22
Chapter 5: Using the Wireless Network Monitor
Create a New Profile
Wireless-N Notebook Adapter
Advanced Setup
If your network is not listed with the available networks, you can use Advanced Setup.
1. Click
Advanced
Setup
on the
Available Wireless Networks
screen to set up the adapter manually.
2. The
Network Settings
screen from the Wireless Network Monitor will appear. If your network has a router or
other DHCP server, click the radio button next to Obtain network settings automatically (DHCP).
If your network does not have a DHCP server or router, click the radio button next to Specify network settings.
Enter an IP Address, Subnet Mask, Default Gateway, and DNS addresses appropriate for your network. You
must specify the IP Address and Subnet Mask on this screen. If you are unsure about the Default Gateway and
DNS addresses, leave these fields empty.
IP Address - This IP Address must be unique to your network.
Subnet Mask - The Adapter’s Subnet Mask must be the same as your wired network’s Subnet Mask.
Default Gateway - Enter the IP address of your network’s Gateway here.
DNS 1 and DNS 2 - Enter the DNS address of your wired Ethernet network here.
Click the
Next
button to continue, or click the
Back
button to return to the previous screen.
Figure 5-15: Available Wireless Networks
Figure 5-16: Network Settings
Summary of Contents for WPC300N
Page 1: ...Model No Notebook Adapter Wireless N WPC300N EU LA User Guide WIRELESS GHz 2 4 ...
Page 60: ...54 Appendix H Regulatory Information Wireless N Notebook Adapter ...
Page 61: ...55 Appendix H Regulatory Information Wireless N Notebook Adapter ...
Page 62: ...56 Appendix H Regulatory Information Wireless N Notebook Adapter ...
