G. After the files have
been successfully
copied, the following
screen will appear.
Click the
Exit
button.
Windows 98SE, Me, and 2000 users: The driver installation
and configuration for Wireless-B PCI Adapter is complete.
Proceed to Step 2.
A. Remove any CDs or disks from their drives, and turn off your desktop PC.
B. Open your PC’s case, and locate an available PCI slot on the motherboard.
Check with your computer manufacturer for instructions.
C. Slide the Adapter into the
PCI slot. Make sure that all of
its pins are touching the slot’s
contacts. You may have to
apply a bit of pressure to
slide the Adapter all the way
in.
W W W . L I N K S Y S . C O M
WMP11_v4-QI_98-30602A KL
Installing the PCI Adapter
E. If you chose
I n f r a s t r u c t u r e
Mode,
go to
Step 5
now. If you chose
Ad-Hoc Mode
,
select the correct
operating channel for
your network. The
channel you choose
should match the
channel set on the
other devices in your
wireless network.
Click the
Next
button.
F. The following screen
will ask you to review
your settings before it
starts to copy files.
Click the
Yes
button to
save these settings, or
click the
No
button to
change any settings.
E
D. After the Adapter is set firmly in place, secure its fastening tab to your
PC’s chassis with a mounting screw. Then close your PC’s case.
E. Attach the external antenna to the
Adapter’s antenna port.
F. Power on your desktop PC.
Windows 98SE, Me, and 2000 users:
The installation of the Wireless-B PCI Adapter is complete.
F
G
For additional information or troubleshooting help, refer to the User Guide
on the Setup CD-ROM. You can also call or email for further support.
24-hour Technical Support
800-326-7114 (toll-free from US or Canada)
E-mail Support
Website
http://www.linksys.com or
http://support.linksys.com
RMA (Return Merchandise
http://www.linksys.com/support
Authorization)
FTP Site
ftp://ftp.linksys.com
Sales Information
800-546-5797 (800-LINKSYS)
C
E