Windows 2000
A
Insert the USB Drivers and User
Guide CD
into your CD-ROM
drive.
B
The Welcome to the Found
New Hardware Wizard screen
will appear. Click Next.
C
The next screen will be Install
Hardware Device Drivers.
Select Search for a suitable
driver for my device (recom-
mended) in the check boxes
and click Next.
D
You will be prompted for the
location of the drivers. Select
CD-ROM drives and click Next.
E
Windows will locate the driver
on the disk and display this
screen. Click Next.
F
Windows will display a screen
that indicates that the drivers
have been installed success-
fully. Click Finish to complete
the installation. When asked if
you want to restart your PC,
remove all diskettes and CD-
ROMs from the PC and click
Yes. If Windows does not ask
you to restart your PC, Restart
your computer anyway.
G
Your driver installation is com-
plete. Go to Step 5 to activate
your account
Activate your Account
A
Contact your Cable ISP to acti-
vate your account.
B
Your Cable ISP will need what is
called a modem MAC Address
for the cable modem capabil-
ity of your Cable Gateway in
order to set up your account.
The 12-digit MAC address is
printed on a bar code label on
the bottom of the Cable Gate-
way.
C
Once you have given them
this number, your ISP should be
able to activate your account.
Your Cable Gateway
is now ready to use.
Windows XP
A
Insert the USB Drivers and User
Guide
CD into the CD-ROM
drive.
B
When the Found New Hard-
ware Wizard screen appears to
confirm that the USB Modem
has been identified by your PC,
select Automatic search for a
better driver (Recommended)
and click Next.
C
Windows will now search for
the driver software. Click Next.
D
When Windows has completed
installing the driver, click Finish.
Restart your PC if asked to do
so.
E
Your driver installation is com-
plete. Go to Step 5 to activate
your account.
Quick Installation
Model No.
Windows Me
A
Insert the USB Drivers and User
Guide CD
into your CD-ROM
drive.
B
Windows will ask you for the
location of the best driver.
Select Automatic search for a
better driver (Recommended)
and click Next.
C
Note: Windows might ask you
for your Windows Me CD-ROM.
Insert it into the CD-ROM drive
and enter d:\win9x in the box
that appears (where “d” is the
letter of your CD-ROM drive.) If
your Windows files are on your
hard drive, try c:\win-
dows\options\cabs as the path.
D
Windows will display a screen
that indicates that the drivers
have been installed success-
fully. Click Finish to complete
the installation.
E
When asked if you want to
restart your PC, remove all dis-
kettes and CD-ROMs from the
PC and click Yes. If Windows
does not ask you to restart your
PC, then Restart your computer
anyway.
F
Your driver installation is com-
plete. Go to Step 5 to activate
your account.
.
4
WCG200-QI-30827NC-BW
5
For additional information or troubleshooting
help, refer to the User Guide on the Setup CD-
ROM. You can also call or email for further
support.
24-hour Technical Support
800-326-7114
(toll-free from US or Canada)
E-mail Support
Website
http://www.linksys.com or
http://support.linksys.com
RMA (Return Merchandise Authorization)
http://www.linksys.com/support
FTP Site
ftp://ftp.linksys.com
Sales Information
800-546-5797 (800-LINKSYS)
Linksys is a registered trademark or trademark of
Cisco Systems, Inc. and/or its affiliates in the U.S.
and certain other countries. Copyright © 2003
Cisco Systems, Inc. All rights reserved.
6
NOTE:
For your convenience,
an administrative utility has
been programmed into the
Cable Gateway. From this
browser-based utility, you
can view the Cable Gate-
way’s current status and,
when wireless functions are
enabled, administer the
wireless settings. To use this
utility, refer to the User Guide
on the CD-ROM.
B
D
E
C
B
D
E
B
C
D
IMPORTANT:
Make sure to go to
Step 5 and activate your account.
IMPORTANT:
Make sure to go to
Step 5 and activate your account.
IMPORTANT:
Make sure to go to
Step 5 and activate your account.
