Power off your network
devices, inclucing your
modem/router and PC.
Model No.
Quick Installation Guide
Model No.
Voice
D
Connect one end of an
Ethernet network cable
(included) to the ETHERNET
port of the ATA. Connect
the other end to the
Ethernet port of your PC.
E
Connect one end of a
different Ethernet network
cable to the INTERNET port
of the ATA. Connect the
other end to your cable/DSL
modem/router.
F
Power on the cable/DSL
modem/router.
G
Connect the included
power adapter to the
ATA’s power port, and then
plug the power adaptor into
an electrical outlet.
H
Power on your PC.
A
Launch the web browser on
the PC.
B
Enter
http://192.168.1.1/
in the
Address
field
(
192.1681.1
is the default
local IP address of the ATA).
Then press the
Enter
key.
C
The
Router - Status
screen
will appear. Click the
WAN
Setup
tab.
MNFSPA2100
Analogue telephone Adaptor
D
Proceed to the appropriate
instructions for your Internet
Connection Type: DHCP,
Static IP, or PPPoE.
Select
DHCP
for the
Connection Type.
3
Click
Submit All Changes.
Static IP
1
Select
Static IP
for the
Connection Type.
2
In the Static IP Settings
section, enter the IP
address in the
Static IP
field,
the subnet mask in the
NetMask
field, and the
default gateway IP address
in the
Gateway
field.
Package Contents
• MNFSPA2100 VoIP ATA
• 5 V Power Adaptor
• RJ-45 Ethernet Cable
• MNF Welcome Guide
• Quick Installation Guide
D
E
G
NOTE:
Make sure your PC’s
Ethernet adapter is set to obtain an IP
address automatically. For more
information, refer to Windows Help.
A
B
Connect one end of the
telephone cable to the
ATA’s PHONE 1 port.
Connect the other end to
your analogue telephone
or fax machine.
C
Repeat Step B with the
PHONE 2 port if you have an
additional telephone or fax
machine to connect.
1
Make sure you have the following:
• An active Internet connection
• A cable/DSL modem/router
• An analogue telephone or fax machine with an RJ-11 phone cable
• A PC will be required for the initial setup of your Internet connection.
B
IMPORTANT:
Do not connect the
PHONE port to a telephone wall jack.
Make sure you only connect a
telephone or fax machine to the
PHONE port. Otherwise, the ATA or
the telephone wiring in your home
or office may be damaged.
C
Configure the Phone Adapter
2
D
C
Static IP
Connect the ATA
Before You Begin
DHCP
3
In the Optional Settings
section, enter the DNS
server address(es) in the
Primary DNS
and optional
Secondary DNS
fields.
4
Click
Submit All Changes.
PPPoE
1
Select P
PPPoE for the
Connection Type.
2
Enter the user name in the
PPPoE Login Name
field,
and enter the password in
the
PPPoE Login Password
field.
Click
Submit All Changes.
PPPoE
Please proceed to
step 2
Please note the following connection types:
DHCP:
Use this connection for Cable
Broadband if the MNFSPA2100
connects directly to an existing router.
Static IP: Assign your own private IP address to
the MNNSPA2100. Suitable if
connecting to an existing router.
PPPoE:
Connect the MNFSPA2100 directly to
the DSL modem.
Please note the MNFSPA2100 is pre-configured with the MyNetFone service.
