background image

Chapter

3

12

Chapter 3: Connecting the Switch

Stacking Multiple Switches

Linksys One Ready Communications Solution

Stacking Multiple Switches

The Stacking configuration provides multiple switch management through a single point as if 
all stack master and slaves were a single Ethernet switch. All stack masters are accessed 
through a single IP address through which the stack is managed. The stack can be managed 
from the the web-based interface or the console interface.

Devices support stacking up to eight Ethernet switches per stack, or can operate as stand-
alone units. During the Stacking setup, the switches auto-select one of the switches as the 
Stacking Master. All other devices are named as slave stack members and assigned a 
unique Unit ID. One of the slave units is designated as the backup master. The backup 
master acts as a slave unit, but can become a stack master in the event of failure of stack 
master. The master and backup master are assigned unit IDs of 1 and 2. The Stack Master 
provides a single point of control and management as well as a single interface in which to 
control and manage the stack.

Switch software is downloaded separately for each stack member. However, all units in the 
stack must be running the same software version.

A stack unit can operate in one of the following modes:

• Stand-alone — The unit runs as a standard switch and does not run the stacking 

application.

• Master Unit — Manages the Stack and is responsible for the configuration.

• Master-Backup — Runs as a slave unit and monitors the operation of the stack 

master.

• Slave — Runs a slave version of the switching algorithm, which allows the 

applications running on the master unit to control the resources of the slave unit.

Stacking Highlights

• In stacking mode, each Ethernet switch is 

given a unique ID, from 1 to 8.

• Stack IDs 1 and 2 are Master Enabled units.

• All Ethernet switches in the stack must run the 

same version of software.

• The Stack Master switch maintains the 

configuration.

• Stack cannot combine Linksys SFE2000 and 

SGE2000 family Ethernet switches.

• By factory default, Ethernet switches boot in 

stacking mode.

• Stack ID can be user assigned or 

automatically assigned.

• Stacking ports are available to user in 

standalone mode as regular network ports

• Settings are applied only to the master unit; 

certain changes take place only after reset

Summary of Contents for SFE2000



















































Reviews: