63
Chapter 8: Configuring IP Information
Configuring Layer 2IP Addresses
SFE1000P Gigabit Ethernet Switch Administration Guide
Chapter
8
Configuring Layer 2IP Addresses
The IP address and default gateway can be either dynamically or statically
configured. In Layer 2, a
static IP address is configured on the
VLAN Management
Properties Page
. The Management VLAN
is set to VLAN 100 by default, but can be modified.
This section provides information for configuring Layer 2 features, and includes the following topics:
• Configuring IP Addressing
• Defining IP Routing
Configuring IP Addressing
The IP Addressing subsection contains the following pages:
• Defining IP Interfaces
• Enabling ARP
Defining IP Interfaces
The
IP Interface Page
contains fields for assigning IP addresses. Packets are forwarded to the default
IP when frames are sent to a remote network. The configured IP address must belong to the same IP
address subnet of one of the IP interfaces.
1. Click
System
>
System Management
>
IP Addressing
>
IP Interface
. The
IP Interface Page
opens:
IP Interface Page
2. Define the relevant fields.
3. Click
Apply
. The IP Interface settings are modified, and the device is updated.