extender RE9000 Setup utilizing WPS Method in only two minutes without having to enter any
information, such as a login, password, or SSID.
Use the steps mentioned below to configure a Linksys extender using WPS.
● You ought to have your extension plugged into the outlet.
● Place your extender next to your current router.
● Simply press the WPS button on the RE9000 .
● The WPS button on your present router should also be pressed.
● The WPS LED won't become fully green for a moment.
● When your extension flashes a solid green light, configuration is successful.
How can I update the firmware on a Linksys RE9000 Extender?
An essential step in the Linksys Extender Setup procedure is the firmware upgrade. The wifi
range extender won't function properly if the firmware isn't updated.
Follow these steps to update the Linksys RE9000 Setup Firmware:
● First, turn the extender on.
● After that, launch a web browser on any wifi-enabled device.
● then use the login information for your Linksys RE9000 to connect to
extender.linksys.com.
● Go to Firmware Upgrade right away.
● To update the Linksys RE9000 , click Update Now.
● The last but not least step is to save the settings.
Reset factory settings
Follow the directions below to reset the Linksys RE9000 to its factory preset settings.
Reset the Linksys RE9000 Extender:
● On the Linksys RE9000 WiFi Range Extender, find the Reset button.
● Just keep in mind that turning on your extension is necessary for the reset procedure.
● Just click the reset button.
● Keep an eye out for the Linksys RE9000 Wifi Extender's startup reset routine.
● It will now constantly return to the factory default settings.
Common problems with Linksys RE9000