Ethernet
(blue) Connect wired devices to your wireless network with Ethernet (network) cables.
The green light turns on when an Ethernet device is connected and active on this port. The light
blinks when the extender is sending or receiving data over the Ethernet port.
How to install the range extender
Before setup, unplug or disconnect any range extenders on the network.
1.
Plug in the range extender midway between your router and the area without Wi-Fi.
%HVXUH\RXKDYHDWOHDVWRI\RXUURXWHU¶V:L
-Fi signal at that point on the device
you will use for setup. The setup software will help you find the best spot if you have
trouble.
<Diagram>
2. Wait for a solid light on the cover of the range extender. It could take up to two minutes.
On a computer, phone or tablet, connect to the Wi-
)LQHWZRUN³/LQNV\V([WHQGHU6HWXS´
<diagram2>
3.
,IVHWXSGRHVQ¶WVWDUWDXWRPDWLFDOO\RSHQDEURZVHUWR
http://extender.linksys.com
.
/LQNV\V¶V6SRWILQGHUWHFKQRORJ\
will help you find the right location for your range
extender if you have trouble. You will be guided to place the range extender closer or
farther from your router to improve the signal. If you nailed it with your first placement
you will not see Spot finder screens.
<screenshot of Too Far page>
4.
During setup you will be asked whether you want the range extender to update itself
automatically. If you allow automatic updates, the range extender will download and install
updates when released by Linksys. Automatic updates will take place overnight so they do not
disrupt your network activity.
You also can decide to manually update your range extender at your convenience.
Summary of Contents for RE6300
Page 1: ...User Guide RE6300 RE6400...
