Linksys RE3000W User Manual Download Page 19

IC Statement: 

 

This device complies with Industry Canada license-exempt RSS standard(s). Operation 

is subject to the following two conditions: (1) this device may not cause interference, 

and (2) this device must accept any interference, including interference that may cause 

undesired operation of the device. 

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux 
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions 
suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de 
l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est 
susceptible d'en compromettre le fonctionnement.

 

 

 

This device and it's antennas(s) must not be co-located or operating in conjunction with 

any other antenna or transmitter except in accordance with IC multi-transmitter product 
procedures. 

Cet appareil et son antenne (s) ne doit pas être co-localisés ou fonctionnement en 
association avec une autre antenne ou transmetteur. 

 

 

IMPORTANT NOTE: 

IC Radiation Exposure Statement: 

This equipment complies with IC RSS-102 radiation exposure limits set forth for an 

uncontrolled environment. This equipment should be installed and operated with 

minimum distance 20cm between the radiator & your body. 

Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies 
pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un 
minimum de 20cm de distance entre la source de rayonnement et votre corps. 

 

 

Summary of Contents for RE3000W





















Reviews: