4
Chapter 3: Setup and Installation of the Gigabit Notebook Adapter
Overview
Gigabit Notebook Adapter
Chapter 3: Setup and Installation of the Gigabit
Notebook Adapter
Overview
This chapter will take you through all the steps necessary to set up, configure, and install the Gigabit Notebook
Adapter. The steps are also available to use the Utility to uninstall the driver for the Adapter, if you should ever
need to do so. After you set up the Adapter with the Setup Utility, you will install the Adapter into your Notebook
PC.
Setup Utility
1. Insert the Setup Utility CD into your PC's CD-ROM drive.
2. The Setup Utility's Welcome screen should appear on your monitor. If it does not, this means the Setup Utility
is not automatically running as it should. Start the Setup Utility manually by clicking the
Start
button,
selecting
Run
, and typing
d:\setup.exe
(where "D" is your PC's CD-ROM drive).
Click the
Install
button to continue this Setup Utility and install the driver. Click the
Uninstall
tab and button
to uninstall the driver. Clicking the
User Guide
button opened this User Guide. To contact Linksys, click the
Contact Us
tab and button. To exit this Setup Utility, click the
Exit
tab and button.
Setup and Driver Installation
1. If you haven’t already done so, click the
Install
button. The
Welcome
screen will appear. Click
Next
to
continue the installation.
Figure 3-1: Driver Installation
Figure 3-2: Start the Installation
IMPORTANT:
Make sure that you don’t connect the Adapter until instructed to do so or the
setup won’t work.
