Page 4 of 4
Configuring
the
Linksys
PAP2T
NA
Adaptor
To Configure the Linksys PAP2T-NA Adaptor
1.
Connect the Linksys PPAP2T-NA to your Ethernet network then connect an
analog telephone to one of the ports labeled PHONE 1 or PHONE 2.
2.
Dial **** on your analog phone, enter 110# and the IP Address the Linksys
PAP2T-NA adaptor acquired from your network is given.
3.
Write down the IP Address, open a Web Browser then enter the IP Address (for
example, http://192.168.2.71) into the Address bar.
4.
Press Enter and the Info tab of the Linksys Telephone Configuration window displays.
5.
Click Admin Login, click switch to advanced view then click Line 1 to configure
the SIP settings.
6.
In the Line Enable field, select yes.
7.
In the SIP Port field, enter 5060.
8.
In the Proxy field enter Evolution PBX’s IP Address (for example, 192.168.165.100).
9.
In the Register field, select yes.
10.
In the User ID field, enter the extension number (for example, 1020)
11.
In the Password field, enter the password provided by Evolution PBX you wrote
down when you created your default extension.
12.
In the Use Auth ID field, select No.
13.
Click Save Settings and the telephone will save, reboot, and automatically
register with Evolution PBX.
