14
Configuration
Linksys
Samba Settings
Select this option to send media files via a network neighborhood when an
event is triggered.
How to configure Samba settings
1.
Enter the IP address of the Samba server.
2.
Enter the username of the Samba server.
3.
Enter the password of the Samba server.
4.
Enter the workgroup of the Samba server.
5.
Enter the shared folder of the Samba server.
6. Click
Apply
.
HTTP Settings
This section allows you to configure your HTTP notification when an event is
triggered.
URL
- Specify the URL to send a HTTP notification. The URL is normally written
as http://IP_address/ notification.cgi?parameter.
Example #1
URL: http://192.168.1.30/xxxx.cgi
Message: name1=value1&name2=vlaue2
Result: http://192.168.1.1/xxxx.cgi? name1=value1&name2=vlaue2
Example #2
http://192.168.1.30/notification.cgi?event=MD&camera=LCAM0336OD
Message
- Enter the message notification that will be sent when an event is
triggered.
Username
- Please enter username if it is required.
Password
- Please enter password if it is required.
