![background image](http://html.mh-extra.com/html/linksys/e1000/e1000_user-manual_1924574026.webp)
23
Wireless-N Router
Linksys E1000
Chapter 3: Advanced Configuration
Wireless > Wireless MAC Filter
Wireless access can be filtered (restricted) by specifying
the MAC addresses of the devices in your wireless network .
Wireless > Wireless MAC Filter
Wireless MAC Filter
Enabled/Disabled
To filter wireless users by the MAC
addresses of their computers or devices, select Enabled .
Otherwise, keep the default, Disabled .
Access Restriction
Prevent PCs listed below from accessing the wireless
network
Select this option to block wireless access by
MAC address . This option is enabled by default .
Permit PCs listed below access to the wireless
network
Select this option to allow wireless access by
MAC address . This option is disabled by default .
MAC Address Filter List
Wireless Client List
Click this option to open the
Wireless
Client List
screen .
Wireless Client List
Wireless Client List
This screen shows computers and other devices on
the wireless network . The list can be sorted by Client
Name, Interface, IP Address, MAC Address, and Status .
Select Save to MAC Address Filter List for any device
you want to add to the MAC Address Filter List . Then
click Add .
To update the on-screen information, click Refresh .
To exit this screen and return to the
Wireless MAC Filter
screen, click Close .
MAC 01-50
Enter the MAC addresses of the devices
whose wireless access you want to control .
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes .