17
Installing and Using the Viewer and Recorder Software
Business Internet Video Camera with Audio
Chapter 5
Recording
This is the Drive and Folder on your PC where
recorded files will be saved. The default location is
C:\
Program Files\LinksysOne\LinksysOne Surveillance
Utility\Storage\Local ID\File Type
. You can also click the
Browse
button to select the desired drive and folder.
Instant Recording Time Limit
Maximum time limit for Instant Recording
This sets
the maximum size of a recording. (Recordings are started
by clicking the
Record
button on the Main screen.)
Motion Detection
Record before Motion Detected
Set the time so the
Utility will start recording a certain time before the Utility
detects motion in a Camera’s field of view.
Record after Motion Detected
Set the time so the Utility
will stop recording a certain time after the Utility detects
motion in a Camera’s field of view.
Disk Allocation for Recording
Total Disk Space
This shows the total amount of storage
space on your hard drive.
Available Disk Space
This shows the amount of storage
space available on your hard drive.
Enable Disk Space Limitation
This feature allows you
to limit the amount of space your recordings occupy on
your hard drive. Click the box for this feature and then
enter the Maximum Allowed Space in the next box. The
Maximum Allowed Space is the amount of space on your
hard drive you’ll allow your recordings to take up, which
should be smaller than the available room you have left
on your drive along with space for your operating system
and other programs. Plan for when that space gets full by
clicking either Overwrite Earliest File, which will delete old
recordings as new ones fill the space, or Stop Recording,
which will end your recording once you fill the space.
Allow a minimum of 300 MB storage space per camera. If
you will be using the same drive that Windows is installed
on to store your recordings, make sure you leave at least
ten percent of available disk space free.
Initial Settings
Launch this Utility when Windows Started
Check this
to have this utility start when Windows starts.
Using the Playback Application
Playback
Video Playback
Load Other Cameras
This option allows you to point to a
specific folder to locate video from other cameras.
Select Camera
Select the appropriate camera as defined
within the Monitor.
Recording Methods
There are four recording methods
to choose from:
All Records
•
Displays all records for the selected
Camera.
Select Period
•
Selecting this option will narrow down
the video selections to the range defined within the
start/end date/time fields.
Start Date
–
Select a starting date from the
calendar.
Start Time
–
Select a starting time using the 24 hr
time format.
End Date
–
Select an ending date from the
calendar.
End Time
–
Select an ending time using the 24 hr
time format.
Event Trigger
•
Selecting this option will limit the
video selections to videos that were recorded because
an event occurred.
Input Trigger
•
Selecting this option will limit the video
selections to videos that were recorded because they
were triggered by an input.
Submit
Once all of the video search parameters have
been defined, click this button to obtain your results.
Video Controls
