18
Reset the device to factory
defaults
Use this option when you need to recover the factory default settings. This
might be necessary when a custom configuration did not go as planned, you
want a new configuration or your Wireless Access Point device does not
appear to be working properly.
Important
: This option resets all personalized settings on your Wireless Access
Point device.
To reset the Wireless Access Point device to its original factory defaults, press
and hold down the
reset
button on the back of the device for 5 seconds. Use
an object that will fit in the slot (such as a pen or pencil).
Or, you can reset the device following the steps below.
Before you can access the Wireless Access Point device, you must first
determine which IP address has been assigned. To identify what the IP
address is:
1. Open your web browser.
2. Type
http://192.168.2.1
in the address bar, and then press
Enter
. If you are
prompted to enter in a username and password, these are set to the
following defaults:
Username
: admin
Password
: admin
FibeRG_0110_ENG_V3 18
05/02/10 10:34 AM