1-36
User Guide for the Cisco Multicast Manager 2.3.3
OL-7348-01
Chapter 1 Using the Cisco Multicast Manager
Using the Administration Tool
The
Current Source/Group Polling Configuration
section shows you all monitored sources and
groups in a tabular format.
•
Under the
Modify
column, you can edit or delete a specific source and group.
•
Under the
Time Threshold
column, click on
Time-Based Thresholds
to configure up to 50
different time of day high and low thresholds for each source and group. Click the
Set Thresholds
button to save your changes.
Each time a source and group exceeds a threshold, a trap is sent and a report is generated.
SG Polling—by Device
You can select a particular router using the The Device SG Polling Configuration page, and you can
configure which sources and routers to monitor on the specific device.
Figure 1-21
Device SG Polling Configuration
The Device SG Polling Configuration page contains:
Fields and Buttons
Description
Refresh Status
The status line indicates how long the polling
daemon has been running and how it was started.
Click
Refresh Status
to update the status
information.
Start
Starts the polling daemon globally.
Stop
Stops the polling daemon globally.
