ENGLISH
Important assembling suggestions:
1.) Before starting, please read our assembling instructions carefully and make yourself familiar with them.
2.)Follow our assembling
instructions carefully.
3.)Compare
the listed parts and fitting list to the contents of the cardboard.
4.)Prepare the necessary tools for assembling and make sure that the tools are in proper condition. Bad tools lead in
some way to difficulties during the assembling.
5.)To make sure that the fumiture will not be damaged or grated during assembling,
prepare an adequate area and cover
the f100r with the cardboards or another soft pad (Le. cloth or carpet).
6.)We recommend
operating always with two or more people.
7.)00 not overwind screws. Check the screws from time to time and if necessary retight them.
8.)Keep the instruction and service sheets. Perhaps you will need them later on.
Malntenance advlce:
For wooden fumiture consisting of glass and steel or MOF and coated surface:
Wooden Fumiture: Stains can be taken off with a soft, moistened cloth or by using a special polish (available in
supermarket
and specialized stores). But do not forget to wipe the surface with a dry and soft cloth afterwards.
Steel fumiture:
The metal has a vamished surface. The material could show little discrepancies
in colour, clouds or stains due to the
machine made production which should not be a reason for a complaint.
If some metal parts have been twisted out of shape during transport. you could carefully try to twist them into the original
position. Please do not overwind the screws and retight them trom time to time.
MOF and coated surfaces:
MOF consists of wooden fibres (please read the a.m. instructions).
00 not work on the coated surfaces with knives or
sharp objects, as this could cause damage the material.
That should not be a reason for complaints afterwards.
Oue to machine made production, the MOF parts can have sharp edges. You could chamfer them with a fine standard
sand paper. Please do it carefully in order to make sure that you will not remove too much of the material.
Waming:
Carrying out the assembly is for adults only. Please, keep your children away during assembling.
Children might take
small parts or fittings away or swallow them up. Ouring assembling it could also happen that parts of your fumiture fall
down on your children. Please, therefore, protect them and make sure that you carry out the assembling in their absence.
If your piece of fumiture consists of glass, it should be handled carefully during assembling.
Glass can break at any time
and cause injuries. Therefore, you should protect your eyes and hands by wearing special c10thing and safety shoes,
available in the supermarkets
and specialized stores.
We are not Iiable for any material damage er injuries resulting trom faulty assembling. We are also not Iiable for any
damage resultant from lack of maintenance
during use. (Le. retightening of screws, and eta -). We are not Iiable for any
damage caused by faulty use or use against its purpose.
We wish you a lot of joy and pleasure with your new piece of fumiture.
Your Quality Assurance Team by Inter Link SA
3/6
