IWI666
‐
B
802.11n
300M+USB
Internal
Internal
16G
SSD
Wireless
Router
Shanghai
DareGlobal
Technologies
Co.,
Ltd
TEL
：
800
‐
820
‐
8756
Power Saving Mode
: The device is supplied with battery and is in normal condition,
press the switch button 1s before releasing, the device will enter Power Saving Mode
(The WI-FI LED is red);
2.1.1.4 Return to normal condition
Under the condition of Fast-Charging Mode/ Power Saving Mode, press switch
button 1s again, the device will back to normal working condition, the WI-FI
indicator is orange or green.
2.1.2 The Reset button
The device is under the working condition, press the reset button 5~ 10s with sharp object,
release the sharp object while all lights turn orange, then the device is performing reset operation.
2.1.3 Restart operation
When the device is malfunction and not working, the Power and Wi-Fi LED is red, use finger to
press switch button and at the same time press reset button 1s with sharp object. Then the device
performs restart.
2.2 Network Configuration
2.2.1 Ethernet Internet configuration
IWI666-B login page address is
iwi.is
and login default password is admin (click “More
Config”).File Browser and Network Neighborhood logged-on user name and password is
defaulted as admin/admin;
IWI666-B support two ways to access Ethernet: Smart Internet access and PPP dial-up. There is
only choice at one time; the default way to access is Smart Internet access.
A
、
Smart Internet access (static/dynamic (DHCP) IP address settings)
LINKING IWI666-B defaults for dynamic IP, plug network cable into LAN port, IWI666-B
can detect the Internet automatically
；
If IWI666-B fails to detect Internet, the WI-FI LED is still orange. Then you can add static IP
address to access the Internet
；
IWI 666 at most supports three static IP addresses at one time. Once set, it can subsequent
adapt automatically.
(a)
Add new static IP address
Using a mobile phone or computer via wireless connection to IWI666-B (Wireless
SSID, Password, See the product label), launch IE browser and enter iwi.is at the
address bar, click enter, select Smart Internet access, click “Add WAN Profile”,
