LINKFLOW FITT360 LF-F200 Quick Start Manual Download Page 3

 

 

This product is protected from splashing water such as sweat or drizzle. Do not immerse the product 

in water. 

  If the product is dropped or shocked, the waterproof function may be damaged. Be careful when you 

use the product.

   

 

The product is not protected from water when the cover is open. Make sure that the cover is closed 

while using it.

 

 

Battery Handling   

 

This product contains a lithium ion battery. Do not store or use the product at extremely high or low 

temperatures. The battery life may shorten temporarily or the product may malfunction.   

 

If the battery smells or leaks, stop use immediately. If you touch the spilled liquid, it may cause burns. 

 

Do not disassemble or damage the battery pack. The battery may explode or ignite.   

 

When disposing of the battery, please do not throw it into the general garbage cans; please observe 

disposal regulations in your area.

 

 

Use and Storage 

  Please wear the product according to instructions to minimize electromagnetic interference to the 

human body. 

  If you feel stiffness while wearing the product, stop use immediately. 

  Do not use in thunderstorms or rain. 

 

Do not use or store in direct sunlight, high humidity or dusty places. It may cause the product to 

malfunction. 

  Do not use the product near an automobile, hospital or medical device affected by high frequency. 

  Keep out of the reach of children or pets. 

  If the product gets wet, leave it turned off and contact a service center. 

  Turn off the product when not in use.   

  Do not use a damaged charger, power cord or plug, or loose outlet. If the connection is unstable, there 

is a risk of fire due to heat generation. In this instance, normal charging may not be possible.   

  Use the enclosed adapter. If not, it may shorten the battery life or cause a malfunction, overheating, 

fire, explosion, or injury. 

 

Do not touch the product, power cord, plug, or outlet with wet hands or any other body part that has 

come into contact with water. Doing so may cause an electric shock.   

 

Do not allow foreign objects to enter the terminals and holes. It may cause  a malfunction or power 

failure. 

 

Do not modify, disassemble or repair the product.   

 

Do not  drill  or disassemble the  product  with  a  sharp  point.  Doing so  may  cause  an  electric  shock, 

explosion, or fire. 

Summary of Contents for FITT360 LF-F200















Reviews: