H
Perforation for
cables
Slot for lock
Perforación para cableado
con solo remover la tapa
Perforaciones para
ventiladores (no incluidos)
Perforation for
wall installation
Lateral doors
Folding front door with
tempered glass window
Wall
(illustrative)
Rails for rack
adjusment
Introduction
Thanks for selecting our wall rack SR19XXGAPV2 series.
The information contained in this manual will help
assemble the product besides illutrating physical characteristics
included parts, application and recommendations.
Recommendations
Install the equipment only after finishing the installation
of the cabinet.
On adobe walls or other material that isn’t concrete, we
recommend to pass the anchors to the other side
and secure them on both sides of the wall.
Installation/ Operation Mode
First install the cabinet base, securing anchors, screws, nuts
and washers for concrete with a recommended recommended
measure of 1/2 inch, then procced to install the cabinet.
Tornilleria Incluida
12 (10-32) phillips cone screw
•
12 Hex nuts for rack
•
12 Conic nylon washer
•
Folding lateral door only removing
screws as shown below:
