©Copyright 2012, LinkTV Media
Page 8
3. Operation
3.1 Initial
Setup
When the receiver is powered on for the first time, the main menu will appear.
When first powering on the unit, please do
the following:
1) Select the System Setup
2) Switch the language using the
◀
▶
buttons
.
Confirm the language by
pressing [OK].
3) Select installation on the main
menu and configure antenna
setting (See section 3.2)
4) Adjust the LNB configuration for
each satellite
5) Start scan to find programs
6) Exit the installation after all
programs are scanned and found
Use the
◀
▶
▲
▼
buttons to navigate the menu and press [OK] on the
remote to make the selections.
3.2 Installation
The Installation menu is located on the main menu.
3.2.1 Antenna Connection
Use the
◀
▶
buttons to set the “Antenna Connection Type”.
3.2.2 Satellite List and Antenna Setup
