background image

 

Batca Fitness Systems

 

20 

Link Free Trainer Owner's Manual

 

What is covered 

For Residential Use: 

Batca Fitness Systems warrants all of its products against defects in manufacturing, materials and 
workmanship under normal use and service for one year from date of purchase including paint, 
chrome, upholstery and grips.  Batca Fitness Systems also warrants all cables, belts, bolts, nuts, 
caps, plugs, bumpers, washers, levelers, decals, gas springs and other hardware for three years af-
ter date of purchase; all moving parts, including pulleys, bushings, bearings and pull pins for five 
years after date of purchase and warrants the frame and all welded parts for the lifetime of the 
original purchaser. 

 

For Commercial Use: 

Batca Fitness Systems warrants all of its products against defects in manufacturing, materials and 
workmanship under normal use and service for six months from date of purchase including paint, 
chrome, upholstery and grips.  Batca Fitness Systems also warrants all cables, belts, bolts, nuts, 
caps, plugs, bumpers, washers, levelers, decals, gas springs and other hardware for one year after 
date of purchase; all moving parts, including pulleys, bushings, bearings and pull pins for three 
years after date of purchase and warrants the frame and all welded parts for ten years after date of 
purchase. 

 

What is not covered 

This warranty does not cover damage, which results from shipping, misuse, abuse, neglect, careless-
ness, modification or alteration, accident, fire, flood, “acts of God” or other contingencies beyond 
the control of Batca Fitness Systems.  This warranty also does not cover deterioration from wear 
and tear or exposure or any defect, which would not have happened if instructions in the owner’s man-
ual had been followed.  Improper installation, improper assembly or follow-up maintenance along with 
installation of parts or accessories not originally intended for products of Batca Fitness Systems 
are also not covered by this warranty.  Only genuine Batca parts should be used for replacement, 
repair, and maintenance for this warranty to apply. 

 

Defective parts will be repaired or replaced at Batca Fitness Systems option, without parts charge to 
the purchaser.  All returns require a return authorization prior to acceptance of repair work.  Batca 
Fitness Systems reserves the right to make design changes without any prior notification and shall 
not be responsible for incidental or consequential damages. 

 

The purchaser is responsible for shipping the defective part back to the factory.  Repair or replace-
ment is the exclusive and sole remedy of the purchaser.  Labor charges associated with parts change-
overs are not covered by this warranty.  Proof of purchase, serial number, model number and date of 
purchase will be required along with all pertinent information of the alleged damage. 

 

This warranty applies only to the original purchaser and is not transferable.  Claims under this war-
ranty must be made directly to Batca Fitness Systems.   

 

 Batca Fitness Systems 

1207 N. New Hope Road 

Raleigh, NC  27610 

(919) 255-1233 

 

 www.batcafitness.com 

 

Limited Lifetime Warranty 

Summary of Contents for free trainer






















Reviews: