CreAte CoNfIGurAtIoN:
• Tap
Create Configuration
. Select ECU type and tap
Next
.
• The gaugeART CAN Gauge allows you to create up to 10 pages
of gauge layouts in 1, 2, or 4 gauge layouts. Tap the center of the
screen for Gauge Screen Setup. On this screen, select a channel,
configure graph range, update speed, warnings, and gauge labels
(e.g. rename “MAP” to “BOOST”).
• Tap
Previous Page
to return.
• Tap the left side to change the configuration between 1, 2, or 4
gauge layout.
• Tap
Next Page
to add a new page or delete to remove a page.
IllumINAtIoN sIGNAl WIrING:
• The Link CAN Gauge can dim illumination during night when the
parking lights are on. Using the factory service manual, find a wire in
the interior that switches to +12V power when the parking lights are on.
Verify with a voltmeter or test light that the wire re12V when
the parking lights are turned on.
• The connection cable provides a separate orange unterminated wire
for +12V illumination power
• Note that some vehicles, including many Hondas, have an illumination
switched connector in the interior fuse box.
• Depending on access to the wire – use a wire tap or splice the factory
wire to connect the gaugeART CAN Gauge orange wire.
CoNNeCt to CAN GAuGe App:
• Search “gaugeART” and download the gaugeART CAN Gauge App
from your device’s app store.
• If you have two Link CAN Gauges, they can be programmed
separately.
• Turn on your ignition to turn on Link CAN Gauge. The welcome screen
will be shown.
• Connect to the gauge via Wi-Fi by tapping on settings > Wi-Fi.
• Tap on gaugeART and enter the default password “12345678”. Allow
the gauge to connect. If prompted with a message that internet is not
available with this device, tap ok.
• You may now open the gaugeART CAN Gauge App.
5
6