9
scanning will be suspended for a minimum of 5 seconds or as long as the
received signal continues.
Press Tri key again or normal key to terminate Tri watch function.
I.
Programmed Priority 10 Channel Scanning Mode
Press and hold Prog. key for 1.5 seconds to access 10 Channel Priority
Programming Mode. Press up or down key again to select first channel to be
scanned. Hold up or down key for 1.5 seconds for fast selection of channel.
Press Prog key again for 1.5 seconds, to access second priority channel
selection mode. Ten (10) priority channels are selectable.
Programmed priority channels may now be manually selected by pressing the
Prog Key. Program numbers 1 through 10 and Channel Numbers will be shown
as selected or scanned.
To scan up to 10 programmed priority channels, press Scan key after Prog key
has been pressed and programming completed. Scan will be indicated on
LCD.
During programmed priority channel scan if scan key pressed again, scanning
will stop on indicated channel. Scan indication will disappear from liquid crystal
display.
If the transceiver hears a signal the scanning function will cease and the
receiver will stay on that channel for four (4) seconds minimum or as long as
the signal continues. During this stop scan period, the scanning function can
be suspended by pressing the scan key again. The scan indication will flash
continuously. Press scan key once again to reactivate scanning.
Press normal key to terminate scanning. The normal channel is recovered from
memory and shown on the liquid crystal display.
Dual Watch scanning may also be set up using one of the above programmed
priority channels (number 1) and Channel 16. Proceed as in normal Dual
Watch (with transceiver in Prog mode.
Memory Retention Function
The unit automatically stores all user- programmed channels when it is sw itched off.
The programmed channels can be recalled and accessible next time when the unit is
switched on.
However, if the power connection is disconnected, the memory retention function will
hold for 1 minute only: the unit will lose its memory if it is disconnected from its power
source for more than 1 minute.
4.5 Key Lock Mode
Press lock key to lock all functions except:
A.
PTT function
B.
CH 13/67 Override function
C.
CH 16 button
D.
H
E.
Hi / Lo button
