7
automatically insert the signal source and the signal source identification
automatically display splicing unit.
2.2
. Manual selection:
Can be used for a single source or multiple sources at the same time connected to
the device, by manually switching the signal source on the remote control display
screen displays an image.
3. split mode
Through the submenu you can choose many kinds of stitching patterns, such as
1x2
、
1x3
、
1x4
、
2x2
Mode, typically split mode before leaving the factory is set up, no need
to debug.
4. Board, card
ID
-Flip
By selecting "card
ID
"Number, in the menu" flip "setting the
ID
Whether an image
needs to be rotated,
180
Degrees.
5. the language
Menu can be selected by remote control:
English
, Simplified Chinese, traditional
Chinese, three different menu display language.
5
th
Pressing Setting
Through the chassis control functions with the remote control button function
control, this section explains the function of each button, as follows:
Menu
Key
:
The following pop-up menu, repeatedly press strike
Menu
Button makes the
cursor stays in the different submenus;
Select/
:
The Red menu parameters are modified;
Save/exit:
To save the modified parameters and exit the menu;
HDMI:
Key to change to the device
HDMI
Input signal source port;
mobile signal:
Key to change to device
mobile signal
port input signal source;
DP:
Key to change to device
DP
ports input signal source;
