2
1
st
. Installation instructions
For the safety of your equipment, please read the safety
instructions carefully before using this device.If you are in
doubt, please read this manual first. In this manual list has
detailed description of the equipment operation. If you are
still have a question, please contact us, we will give you a
satisfactory answer as soon as possible.
If there is any change in the specification, Please forgive us
for not informing you.
When equipment is installing, please note the following:
1. Power:
This equipment uses 12V/3A external power supply, power supply
supports 100-240V AC voltage input, please do not easily change
other brand power supply.
2. Power off:
Please make sure power off when you connect cables or carry the
equipment,and others.
3. Cables:
Don't squeeze the wire,Separate the power cables and signal
cables,Prevent interference.
4. Cooling hole:
There are some cooling hole of the Equipment outside surface ,
do not plug these holes, so as to avoid heat accumulation,
damage to equipment or cause fire and other hazards.
5.Equipment placement:
Should be reasonable placement equipment, such as the load
standard rack, chassis, cabinets, or placed in a solid flat on
the table, to prevent the device from falling.
6.Environment:
Equipment working environment should pay attention to dust,
moisture, in particular, to prevent the liquid immersion and
splash into the device.
