8
Third Chapter Machine installation
1 Unpacking
Check the host and accessories. Including the host, CD, power cable, remote control,
warranty card, manual.
2 Install the machine
display unit setting: LM-SH41-4K2K HD Quad video multiplexers Support 1 channel
HDMI2.0 output, the display unit input signal is set to HDMI; if there are several HDMI
input signals simultaneously, the signal source is set to HDMI input port.
output and display unit is connected: place Quad video multiplexers is completed, a
signal output via HDMI cable docking with HDMIport of the corresponding display unit.
If you need an external audio, devices connect with external audio through the
headphone jack at both ends 3.5mm audio cable .
Input Signal Connection: Connect the computer or other signal source output devices
with splitter input port via HDMI cable, VGA cable or DP line ;
If VGA require audio feature, use both ends with 3.5MM headphone jack cable to
connect the computer and the input Audio ports of device ;
3. Power on
After finishing connecting the cables that we have talked above , insert the 100~240V
AC power supply, turn on the power switch, power indicator lights is red for power-on
state, the light is red for standby mode.
