12
4. Operation instruction
■
Getting started
After finishing all steps above, system is workable, follow below
steps.
a)
Ensure the video source and the display terminal are power on.
b)
Ensure all input, output cables are connects.
c)
Inset TX and RX power adapters into power plug bases.
d)
Green power indicator will light.
e)
It takes about 2~3 seconds to finish EDID and other initialization
automatically.
f)
Transmitter video indicator will light; it means input video signal
is OK. Then receiver video indicator will light, it means output
video signal is OK.
g)
At this time, display terminal will show the same format video that
video source send out.
■
Remote IR function
Using video source’s (such as Blue-ray DVD) IR controller faces
extender RX side IR receiver. IR signal will be transmitted to extender
TX side IR output port, to control video source directly.
Summary of Contents for A
Page 1: ...HDMI USB KVM Extender LM EX50S User manual ...
Page 9: ...7 ...