Trouble Shooting
Problems with the heaters
One heater is not working
Check whether the heater was accidentally switched off.
Check the cable connections on the heater and the control box on the roof.
Change the heater
Change of a ceramic heater
WARNING: Before changing the heaters, the entire cabin must be disconnected from the power!
1.
Remove the Grid in front oft he heater
2.
Unscrew the top white cap
3.
Remove the ceramic protection and loosen the heater with pliers so that you can remove
the nuts and spacers
4.
Remove the white plug on both sides
5.
Remove the heater
6.
To insert the new heater, go through these steps in reverse order
The heater only gets partially warm
Check whether the heater is correctly inserted in the holder.
If everything is connected correctly, the heater may be defective and must be replaced.
All heaters do not work
Make sure that the electrical outlet to which the cabin is connected supplies power. For example,
connect another another device.
Check all cable connections.
The soft keys don’t work
Disconnect the infrared cabin from the circuit, wait a minute, and then try again.
The infrared cabin cannot be turned on
Make sure that the electrical outlet to which the cabin is connected supplies power. For example,
connect another another device.
Check all cable connections.