Linhai UTV 1100D 4x4 EPS, Owner'S/Operator'S Manual

Page: 85 / 108

Linhai UTV 1100D 4x4 EPS OWNER’S/OPERATOR’S MANUAL Europe
85
COOLING
WARNING

Do not stop the engine suddenly; stop it after about 5 minutes of unloaded idling.

Work only after letting the engine and radiator cool off completely (more than 30 minutes
after it has been stopped).

Do not remove the radiator cap while coolant is hot. When cool to the touch, rotate cap to
the first stop to allow excess pressure to escape. Then remove cap completely.

If overheats should occur, steam may gush out from the radiator or recovery tank; severe
burns could result.
Checking coolant level, adding coolant
1. Remove the radiator cap, after the engine has completely cooled, and check to see that
coolant reaches the supply port.
2. If the radiator is provided with a recovery tank, check the coolant level of the recovery
tank, if it is between the "FULL" and "LOW" marks.
3. When the coolant level drops due to evaporation, add water only up to the full level.
(1) Radiator pressure cap (1) Recovery tank (A) "FULL“
(B) "LOW"
Changing coolant
Have the coolant changed by an authorized Linhai service.
Checking radiator hoses and clamps
CAUTION
Be sure to check radiator hoses and hose clamps periodically. If radiator hose is
damaged or coolant leaks, overheats or severe burns could occur.
Check if radiator hoses are properly fixed every 200 hrs or 6 months, whichever comes first.
1. If hose clamps are loose or water leaks, tighten hose clamp securely.
2. Replace hoses and tighten hose clamps securely if radiator hoses are swollen,
hardened or cracked.
Replace hoses and hose clamps every 2 years or earlier, if checked and found that hoses are
swollen, hardened or cracked.