Linhai LH400CUV-2, Service Manual

Page: 75 / 208

CHAPTER 3 ENGINE
ATV SERVICE MANUAL 2005/ version number 0501
CHAPTER 3 ENGINE PAGE. 3- 49
2. Check:

Starter clutch operation
Push the dowel pins to the arrow direction.
Unsmooth operation
→
Replace.
Checking steps:

Hold the starter clutch.

When turning the starter wheel gear clockwise,
the starter clutch and the starter wheel gear
should be engaged.

If not, the starter clutch is faulty. Replace it.

When turning the starter wheel gear counter
clockwise, it should turn freely.

If not, the starter clutch is faulty. Replace it.
A.C. MAGNETO ROTOR INSTALLATION
1. Install:

Starter wheel gear

.

Woodruff key

NOTE:
Install the starter wheel gear

, then install the
woodruff key

.
2. Install:

Plain washer

Rotor

NOTE:

Clean the tapered portion of the crankshaft
and the rotor hub.

When installing the magneto rotor, make sure
the woodruff key is properly seated in the key
way of the crankshaft.
3.Tighten:

Nut(rotor)

NOTE:
Tighten the nut (rotor)

while holding the
magneto rotor

with a sheave holder

.