rate…………………………………………………………………………….6.75Gbps
Input/Output TMDS signal ………….…………………………..……………… 0.5~1.5Volts p-p
Input/Output DDC signal ……………………………………………..………… 5Volts p-p (TTL)
Input cable distance..…... ………………………….……≤15m AWG24 HDMI standard cable
Output cable distance…………………………….….…...≤25m AWG24 HDMI standard cable
Max working current…………………………………………………………………………900mA
Power adapter format………………..Input:AC (50HZ, 60HZ) 100V-240V; Output: DC5V/2A
Operating Temperature ran
ge……..…………….………………………………… (-15 to +55
℃
)
Operating Humidity range………………………….….……….5 to 90%RH (No Condensation)
Dimension (L x W x H)
……………………………….……………………..…134x89x22 (mm)
Weight…..………………………………………………………..…….……..…………………330g
IR Remote Operating Instruction
1
．
Firstly take off the plastic film that inserted in the rear of remote board
2
．
The A and B signifies the HDMI A output and B output.
3
．
If the Signal output from A,
Only press the number key below A line. Like after you press the 2 key under A line, the
signal 2 will output from A.
4
．
It can control the optical audio output format by control the audio key in the remote
board.The default audio format for optical is the same as the TV audio output--Stereo
Sound.When press the audio key for first time,the optical audio output is HIFI(inluding DTS-
HD/Dolby-true HD/LPCM7.1/DTS/Dolby-AC3/DSD) while the tv sound is off.For the second
time to press the audio key,the optical audio output will go back normal as the default
state.This operation can be done circulately.
5
．
The plastic film is strongly advised to insert the rear of the remote board when the
remote is not used for long time.
